Stirtec: V-WMC1060


(1060 x 610 x 760 mm)

The smallest product of Stirtec is the V-WMC1060 with x-y-z traverse lengths of 1016 x 610 x 760 mm. This can be offered at a very attractive price.

 

The machine consists of two highly damping castings made from grey iron: the base and the column.


Data of the Stirtec V-WMC1060


Travels

  • x-axis (left-right): 1016 mm
  • y-axis (front-rear): 610 mm
  • z-axis (up-down): 760 mm
  • Spindle face to table: 150 – 910 mm
  • Max. feed rate: 40 m/min
  • Rapid traverse: 40 m/min
  • Accleration: 5 m/s²

Tool Magazine

  • Tool slots: 30 pcs
  • Tool interchange time: 3,5 s
  • Hollow shaft HSK-A63
  • Max. tool diameter
    · with full magazine: 80 mm
    · without adjacent tools: 160 mm
  • Max. tool length: 300 mm
  • Max. tool weight: 6,5 kg
  • Max total tool weight: 195 kg


Machine Table

  • Table size: 1270 × 590 mm
  • T slots (number × width × span): 5 × 18 mm × 125 mm
  • Max. load on table: 1350 kg

Precision (VDI 3441)

  • Position accuracy (P): 0,008 mm
  • Repeatability (Ps max.):  0,005 mm
  • Measurement system: direct (linear, absolute)


Weight and Dimensions

  • Floor space:
    · FSW machine only: 2750 x 2120 mm
    · with chip removal: 4220 × 2120 mm
  • Max. height: 3100 mm
  • Weight: 7700 kg

Energy Supply

  • Nominal voltage: 3 × 400 V/50 Hz
  • Power of spindle motor: 33 kVA
  • Compressed air: 0,6 – 0,8 MPa


Variants

Following variants are available:

  • V-FSWC1060 exclusively for FSW without chip removal and without cutting fluids
  • V-HSMC1060 exclusively for CNC milling without close-loolp force control System
  • With manual pallet changer (pallet size 760 × 460 mm)
  • With automatic pallet changer (pallet size  1250 × 590 mm) 

Regular Updates

Descriptions, data and illustrations may not always correspond with the machine latest version.